14 Tips To Help Select The Perfect Car Wash Site

By OPW | Jun 11, 2019

Finding the perfect plot of land on which to place a car wash can resemble a scene from “Goldilocks and the Three Bears” – This one’s too small. This one’s too remote. This one’s juuuuust right! However, finding that “just right” location can be very difficult, and failing to do so can spell the difference between success and failure for a car wash operator.

With the size of the investment required for land acquisition, permitting, construction, equipment, staffing and operational costs, it behooves car wash operators to leave no stone unturned when performing their due diligence during the site-search phase. To lend a hand, we offer this comprehensive checklist, The Top 14 Things To Consider When Selecting A Car Wash Location:

1. Area Profile

It should be obvious: where the vehicles are is where the car wash should be. But aside from population demographics, there are areas that are more likely to produce the vehicle traffic that is the lifeblood of the car wash operation. In descending order, the most desirable areas are retail/shopping corridors, business centers, residential areas and industrial parks. Major retail areas are the preferred spots because of the traffic they create, especially from drivers who are categorized as “soccer moms” or “service seekers;” these folks make up the largest percentage of wash customers.

2. Market Profile

In general, people are naturally attracted to things that are shiny and new. In the retail marketplace, people will flock to new and developing areas to see what the buzz is about. That makes those areas ideal for a car wash site. After that, the most desirable are growing or stable established areas, while declining areas offer fewer opportunities.

3. Type of Traffic

Not all traffic is created equal. As noted earlier, shoppers form the sweet spot amongst car washers. After that, local business and residential traffic can be profitable, while the operator may want to think twice before locating the wash where the majority of traffic comes from commuters.

4. Traffic Speed

A driver zooming down the road at 70-plus miles an hour isn’t likely to slam on the brakes and pull into a car wash – even if they are able to read the signage as they fly by. That makes traffic speed an important consideration. In fact, it is not recommended that a wash be located along a strip of road where the speed limit is higher than 50 mph. The best areas are those with a 30-mph speed limit, with the attractiveness decreasing as the posted speed limit increases.

5. Location of Lot

There are generally four configurations that must be considered:

  • Best: Corner lot at light
  • Good: Inside lot near light
  • OK: Corner lot with no light
  • Caution: Inside lot with no light
  •  

    6. Site Access

    Ease of entrance and exit to and from the roadway is critical:

  • Optimal: Easy ingress and access at a corner lot
  • Good: Easy ingress and access with medium traffic strip
  • Caution: Difficult ingress and access
  • Avoid: Difficult access due to divided highway
  •  

    7. Site Visibility

    A car wash that cannot be seen by drivers will not be visited. Operators should strive to find a site that offers visibility – from both directions – of at least 500 feet, while any site lines less than 200 feet should be avoided. Other things to note – and avoid – when considering site visibility are large setbacks, especially when nearby buildings do not have similarly large setbacks, and difficulty viewing the site or signage due to surrounding trees/vegetation or bridges/overpasses.

    8. Traffic Counts

    Traffic-count totals can usually be found on municipal or state Department of Transportation websites. Obviously, areas with higher traffic counts are most desirable, with counts in excess of 10,000 vehicles a day the best option.

    9. Hours of Operation

    A site that stays open 24 hours a day, seven days a week offers the best bang for the buck, but state or municipal laws may restrict the number of “open” hours a site can offer. Short of 24/7 operation, being able to operate for at least 75 hours a week (nearly 11 hours a day) is the best option, with the benefits receding as the allowable hours of operation diminish.

    10. Zoning Requirements

    Among the types of zoning requirements that must be considered before selecting a site are noise ordinances, lighting ordinances, hours of operation ordinances and utility consumption, especially as it pertains to peak-usage regulations.

    11. Access to Utilities

    The site must have easy access to water/sewer, electrical and natural gas service. Water must be available at flow rates up to 30 gallons per minute at pressures of 30-50 psi. While there are a lot of variables the typical site should have an electrical service to accommodate a 200-amp breaker panel at 208 VAC 3PH. The location must also have access to reliable Internet service.

    12. Size of Lot

    Lot size needs can vary greatly depending on the type of car wash. The size and shape requirements differ between a tunnel and in-bay automatic wash. Contacting your local car wash expert, your distributor, will be the best option to help determine if a parcel of land is the correct shape and size to maximize your chances of success.

    13. Vehicle Stack

    Knowing the average length of a vehicle, is there enough room to accommodate two, three, four or five-plus vehicles per bay? Is there enough room to feed a tunnel wash with multiple lanes? Is the site conducive for a left hand turn? Thinking beyond just the number of cars a site can stack is critical. Orientation, visibility and direction can all play a role in vehicle stacking.

    14. Location of Competition

    There are two variables to consider when evaluating the competition. The first, and simplest, is the physical distance between the sites. A location where the closest competitor is at least seven miles away is preferable, with the threat of the competition increasing as the distance between the sites decreases. Secondly, the type of wash and services that are being offered by the competition must be considered. Is the competitor’s wash an in-bay automatic or a tunnel? Full service or exterior only? Friction or touch-free? Self-serve or manned? Standalone or attached to a gas station/convenience store? What other services are offered (vacuums, detailing, etc.)?

    With so many variables to consider, it becomes difficult to completely satisfy all of them, so a bit of give-and-take will be required during the site-procurement process. By using these 14 considerations as a guideline, car wash operators can make a very reasoned and, hopefully, successful site-selection decision.

     

    OPW Products

    Finding the right solution for our customers is a mission without boundaries.

    A strong global presence, coupled with extensive engineering, research and testing capabilities, enables OPW to create a steady flow of new products while, at the same time, helping enhance the performance of existing products.

    View Our Products

     

    Delivering the Best Quality Loading Arms

    OPW offers premium-grade top and bottom loading arms, swivel joints, sight flow indicators, quick and dry disconnect couplers and safety breakaways for use in railcar rack systems and platforms, bulk plant and liquid terminals applications.

    Engineered Systems Homepage

     

    Safe and Efficient Fueling Transportation

    OPW creates components and systems for use on tank trucks, tankers and rail tank cars to provide for the safe and efficient loading, transport, transfer, handling and unloading of petroleum-based fuels, chemicals and dry bulk cargo hazardous bulk products around the world.

    Civacon Homepage Midland Homepage

     

    Revolutionizing Fueling Operations Worldwide

    OPW offers solutions for conventional, vapor recovery, DEF, Ethanol, Biodiesel, CNG, LPG and Hydrogen fueling, as well as a complete portfolio of solutions for above ground storage tanks.

    Retail Fueling Homepage

     
     

    Helping to Make Car Wash Operators Successful

    PDQ has provided the car wash industry with cutting-edge technological advances in car wash equipment and car wash systems, including the first contouring arch and the Virtual Treadle.

    PDQ Homepage Belanger Homepage

     

    Delivering the Best Quality Loading Arms

    OPW offers premium-grade top and bottom loading arms, swivel joints, sight flow indicators, quick and dry disconnect couplers and safety breakaways for use in railcar rack systems and platforms, bulk plant and liquid terminals applications.

    Fluid Transfer Group Europe Homepage

     

    Safe and Efficient Fueling Transportation

    OPW creates components and systems for use on tank trucks, tankers and rail tank cars to provide for the safe and efficient loading, transport, transfer, handling and unloading of petroleum-based fuels, chemicals and dry bulk cargo hazardous bulk products around the world.

    Fluid Transfer Group Europe Homepage

     

    Revolutionizing Fueling Operations Worldwide

    OPW offers solutions for conventional, vapor recovery, DEF, Ethanol, Biodiesel, CNG, LPG and Hydrogen fueling, as well as a complete portfolio of solutions for above ground storage tanks.

    Retail Fueling Homepage